The aluminium casing sheet is powder-coated and completely wired. Holding clips, which are impressed onto the sheet, serve as fixation of the lamp cover.
Ceiling mounting light
The aluminium casing sheet is powder-coated and completely wired. Holding clips, which are impressed onto the sheet, serve as fixation of the lamp cover.
Ceiling fitted lightings
LED-General illumination 143 515
The LED module can be customized in light color and intensity of light. The classification in DZUS mount and LED module guarantees easy adjustment. The mount allows various inclinations of the light axis thru different completions.
LED-General illumination 143 542
The deep-drawn plastic profile can be customized in form, colour and dimension. Thereby the LED’s can follow (almost) any contours and courses. Input voltages could be provided with an adapted electrical power supply.
Ceiling fitting light P 08 6070 (LED)
The light bulb application with bayonet clasp will be inserted into the zinc dicasing with a special tool. The visible components are chromium-plated or nickel-plated.
Ceiling fitting light P 08 6071 (LED)
The light bulb application with bayonet clasp will be inserted into the zinc dicasing with a special tool. Due to an additional diaphragm the light bulb application is located further backwards and therefore creates an antireflexion of light. The visible components are chromium-plated or nickel-plated.
Ceiling fitting light P 03 70xx
In an aluminium reflector with integrated light bulb socket are a lamp body (straight, RAL 9010) and a polycarbonate cover pane combined. The socket holder which is clipped to the lamp body on both sides, incorporates the lamp operating device (electronic ballast).
Ceiling fitting light P 03 7049
In an aluminium reflector with integrated light bulb socket are a lamp body (straight, RAL 9010) and a polycarbonate cover pane combined. The socket holder which is clipped to the lamp body on both sides, incorporates the lamp operating device (electronic ballast).
Ceiling fitting light P 03 7070
In an aluminium reflector with integrated light bulb socket are a lamp body (straight, RAL 9010) and a polycarbonate cover pane combined. The socket holder, which is clipped to the lamp body on both sides, incorporates the lamp operating device (electronic ballast).
Ceiling fitting light P 37
Inside, the powder-coated casing of the built-in light fitting the internal wiring, sockets, light bulb and the lamp operating device (electronic ballast) are situated. The lamp cover consists of two spherical caps with holding sheets, two aluminium profiles, one opal polycarbonate cover of the light emitting profile and the lamellae cascade. Areas locates next to the light, can be illuminated through the lamellae cascade.
Ceiling fitting light 143 380 0x
The aluminium sheet lamp casing will be powder-coated and contains the entire electrical installation. According to the respective version, an electronic ballast (18-36 W DC) will be provided. The opal polycarbonate cover will be clipped into the casing.
Ceiling fitting light 143 063 xx
The light consists of an steel sheet casing with built-on electronic ballast, which in inserted in the train profile. As cover is used a tarnished polycarbonate pane with checked pattern, which will be enclosed on both sides.
Ceiling fitting light 00 92 50
The light is constructed as counter-sunk mounted wall-and seiling light. The exchange of the light bulbs occures after removal of the facing board, from the passenger compartment.
Ceiling fitting light P 03
In the aluminium housing can be assembled different LED-carriers. Thereby, different visual effects are achieved. Possible is a luminous circular area, as well as small round starry sky.
Ceiling fitting light 00 92 4x
On the steel sheet lamp casing (0,88 mm) with retention clip and inlying sockets, the lamp operating device (electronic ballast) and the wiring on the casing are fixated. The polycarbonate cover will be clipped.
Reading lights
Reading light P 08 27xx LED
A polycarbonate casing with different light emitting angles 0° / 10° / 20° / 28° and 37° is applied for the LED reading lamp. The casing integrates a LED module as well as an optical lens system. The heat dissipation is controlled by an efficient heat sink.
Reading light P 08 601x (HALOSTAR)
A casing with different light emitting angles 0° / 10° / 15° / 20° / 28° and 37° is used for the reading lights. The polycarbonate casing integrates the aluminium reflector, a galvanized socket carrier, a coolbeam seal as well as a G4 socket.
Reading light P 08 602x (DECOSTAR)
A casing with different light emitting angles 0° / 10° / 15° / 20° / 28° and 37° will be used for the reading lights. The polycarbonate casing integrates a galvanized socket carrier, a coolbeam seal, a G4 socket and the 12 V light bulb Osram DECOSTAR.
Lighted work station
Cockpit ceiling LED lamp 143 552_54
The cover is inserted in a milled aluminium frame. The housing is put on and connected with the frame. In this housing are assembled LEDs. The current source for the supply of the LEDs is at the backside of the housing.
Divers desk-LED lamp 143 527
The light is intended to be built under a desk cover, or assembled in casing. Their low height makes it easier for the covered installation.The housing is sealed, but the cover only screwed. A higher IP-safety class can be offered.
Flexible LED-reading lamp 143 532_81
The lamp head with integrated LED is mounted on a flexible goose neck. Simultaneous the head acts as heat sink, in which different LEDs could be inserted.
